NHD INDUSTRIAL CO., LTD.

It is a 3 pole AC contactor with completed international approvals: cCSAus, CE, UL, CCC, CNS.  The coil can be connected from the opposite side and also the same side, makes the using be more flexible. The specification is as below: Contacts: 3NO+1a or 3NO+1b Rated insulation voltage, Ui: 1000V Thermal current Ith (AC1): 20A Rated Operational Current (AC3): 9A Mechanical Durability: 5 Mil. Cycles (1200 cycles/hr.) Electrical Durability: 0.5 Mil. Cycles (1200 cycles/hr.) Rated Capacity for 3Phase AC3 (kW/A): 220V→ 2.2kW/3HP 380V→ 3.7kW/5HP 575V→ 3.7kW/5HP  Auxiliary Contacts: CA1 (Top mounting) & CA8 (Side mounting) Overload Relay: NTH series Electric & Mechanical Interlock: CA9 (Two functions in one)

It is a 3 pole AC contactor with completed international approvals: cCSAus, CE, UL, CCC, CNS.  NHD was established in 1979, with over 40 years of experience, starting from custom low voltage control panel and producing contactor. Therefore, we are skilled in technology and have rich professional knowledge. Welcome to contact us if you have any questions or special demands. The specification is as below: Contacts: 3NO+1a or 3NO+1b Rated insulation voltage, Ui: 1000V Thermal current Ith (AC1): 40A Rated Operational Current (AC3): 32A Mechanical Durability: 5 Mil. Cycles (1200 cycles/hr.) Electrical Durability: 0.5 Mil. Cycles (1200 cycles/hr.) Rated Capacity for 3Phase AC3 (kW/A): 220V→ 7.5kW/10HP 380V→ 15kW/20HP 575V→ 15kW/20HP Auxiliary Contacts: CA1 (Top mounting) & CA8 (Side mounting) Overload Relay: NTH series Electric & Mechanical Interlock: CA9 (Two functions in one)

It is a 3 pole AC contactor with CE, and CCC approvals.  All products are made in Taiwan, so we are available to make the voltage and frequency according to customer’s demand. If there is any special requirement, welcome to discuss with us. The specification is as below: Contacts: 3NO,1NO+1NC Rated insulation voltage, Ui: 1000V Thermal current Ith (AC1): 60A Rated Operational Current (AC3): 55A Mechanical Durability: 5 Mil. Cycles (1200 cycles/hr.) Electrical Durability: 0.5 Mil. Cycles (1200 cycles/hr.) Rated Capacity for 3Phase AC3 (kW/A): 220V→ 15kW/20HP 380V→ 30kW/40HP 575V→ 30kW/40HP Auxiliary Contacts: CA1 (Top mounting) & CA8 (Side mounting) Overload Relay: NTH series Electric & Mechanical Interlock: CA9 (Two functions in one)

It is a 3 pole AC contactor with CE, and CCC approvals.  This is the maximum one of the C series, whose thermal current (AC1) is 130A and it is 40HP at AC 220V. If there is a demand for higher capacity, please refer to the S-C series, above S-C100 type. The specification is as below: Contacts: 3NO,1NO+1NC Rated insulation voltage, Ui: 1000V Thermal current Ith (AC1): 130A Rated Operational Current (AC3): 110A Mechanical Durability: 5 Mil. Cycles (1200 cycles/hr.) Electrical Durability: 0.5 Mil. Cycles (1200 cycles/hr.) Rated Capacity for 3Phase AC3 (kW/A): 220V→ 30kW/40HP 380V→ 55kW/75HP 575V→ 60kW/80HP Auxiliary Contacts: CA1 (Top mounting) & CA8 (Side mounting) Overload Relay: NTH series Electric & Mechanical Interlock: CA9 (Two functions in one)

It is a 3 pole AC contactor with CE approval. The quality is great enough to be sold into the Korean market. The specification is as below: Contacts: 3NO, 1NO+1NC Rated insulation voltage, Ui: 1000V Thermal current Ith (AC1): 20A Rated Operational Current (AC3): 9A Mechanical Durability: 5 Mil. Cycles (1200 cycles/hr.) Electrical Durability: 0.5 Mil. Cycles (1200 cycles/hr.) Rated Capacity for 3Phase AC3 (kW/A): 220V→ 2.2kW/3HP 380V→ 3.7kW/5HP 440V→ 3.7kW/5HP Auxiliary Contacts: SMC-D11 (Side mounting), CA2 & CA4 (Top mounting). Overload Relay: NTH series

It is a 3 pole AC contactor with CE approval. The standard type is equipped with 2a2b auxiliary contact block, but since the auxiliary contact block is detachable, it can follow customers' demand to do the combination. The specification is as below: Contacts: 3NO, 2NO+2NC Rated insulation voltage, Ui: 1000V Thermal current Ith (AC1): 60A Rated Operational Current (AC3): 42A Mechanical Durability: 5 Mil. Cycles (1200 cycles/hr.) Electrical Durability: 0.5 Mil. Cycles (1200 cycles/hr.) Rated Capacity for 3Phase AC3 (kW/A): 220V→ 11kW/15HP 380V→ 19kW/25HP 440V→ 19kW/25HP Auxiliary Contacts: SMC-D11 (Side mounting), CA2 & CA4 (Top mounting). Overload Relay: NTH series

It is a 3 pole AC contactor with CE approval. The auxiliary contact block of this model is detachable. Customers can change it according to demands, making the price be more competitive and using be more flexible. The specification is as below: Contacts: 3NO, 2NO+2NC Rated insulation voltage, Ui: 1000V Thermal current Ith (AC1): 100A Rated Operational Current (AC3): 65A Mechanical Durability: 5 Mil. Cycles (1200 cycles/hr.) Electrical Durability: 0.5 Mil. Cycles (1200 cycles/hr.) Rated Capacity for 3Phase AC3 (kW/A): 220V→ 19kW/25HP 380V→ 33kW/45HP 440V→ 33kW/45HP Auxiliary Contacts: SMC-D11 (Side mounting), CA2 & CA4 (Top mounting). Overload Relay: NTH series

It is a 3 pole AC contactor with CE approval and it’s the maximum contactor of the SMC series. The standard type is equipped with 2a2b auxiliary contact block, which is detachable. We can follow customer’s demand to manufacture it, also diverse clients’ use. The specification is as below (AC): Contacts: 3NO, 2NO+2NC Rated insulation voltage, Ui: 1000V Thermal current Ith (AC1): 160A Rated Operational Current (AC3): 110A Mechanical Durability: 5 Mil. Cycles (1200 cycles/hr.) Electrical Durability: 0.5 Mil. Cycles (1200 cycles/hr.) Rated Capacity for 3Phase AC3 (kW/A): 220V→ 30kW/40HP 380V→ 55kW/75HP 440V→ 55kW/75HP Auxiliary Contacts: SMC-T11 (Side mounting), CA2 & CA4 (Top mounting). Overload Relay: NTH series

It is a 3 pole DC contactor with CE approval. Its auxiliary contact blocks are the same as the SMC series, saving inventory cost. The specification is as below: Contacts: 3NO, 1NO+1NC Rated insulation voltage, Ui: 1000V Thermal current Ith (AC1): 20A Rated Operational Current (AC3): 9A Mechanical Durability: 5 Mil. Cycles (1200 cycles/hr.) Electrical Durability: 0.5 Mil. Cycles (1200 cycles/hr.) Rated Capacity for 3Phase AC3 (kW/A): 220V→ 2.2kW/3HP 380V→ 3.7kW/5HP 440V→ 3.7kW/5HP Auxiliary Contacts: SMC-D11 (Side mounting), CA2 & CA4 (Top mounting).

It is a 3 pole DC contactor with CE approval. The maximum contactor of the SMD series is 220V 15HP (SMD-4022). Welcome to contact us for any queries. The specification is as below: Contacts: 3NO, 2NO+2NC Rated insulation voltage, Ui: 1000V Thermal current Ith (AC1): 50A Rated Operational Current (AC3): 32A Mechanical Durability: 5 Mil. Cycles (1200 cycles/hr.) Electrical Durability: 0.5 Mil. Cycles (1200 cycles/hr.) Rated Capacity for 3Phase AC3 (kW/A): 220V→ 7.5kW/10HP 380V→ 15kW/20HP 440V→ 15kW/20HP Auxiliary Contacts: SMC-D11 (Side mounting), CA2 & CA4 (Top mounting).

It is a 3 pole AC contactor. To ensure the quality of our products, we insist to use pure and high-quality raw materials. Besides, we will use suitable silver contacts for different industries, therefore, please let us know which field you are going to use for. This series is very popular in the field of Crane and Hoist. Please don’t hesitate to let us know your questions. The specification is as below: Contacts: 3NO+1NO or 3NO+1NC Rated insulation voltage, Ui: 1000V Thermal current Ith (AC1): 20A Rated Operational Current (AC3): 12A Mechanical Durability: 5 Mil. Cycles (1200 cycles/hr.) Electrical Durability: 0.5 Mil. Cycles (1200 cycles/hr.) Rated Capacity for 3Phase AC3 (kW/A): 220V→ 3kW/4HP 380V→ 4kW/5.5HP 415V→ 4kW/5.5HP Overload Relay: TH series

It is a 3 pole AC contactor. We have made low voltage control cabinets and magnetic switches over 40 years, have extensive experience in this field and we are committed to providing customers high quality and reasonable price products. The specification is as below: Contacts: 3NO, 2NO+2NC Rated insulation voltage, Ui: 1000V Thermal current Ith (AC1): 36A Rated Operational Current (AC3): 24A Mechanical Durability: 5 Mil. Cycles (1200 cycles/hr.) Electrical Durability: 0.5 Mil. Cycles (1200 cycles/hr.) Rated Capacity for 3Phase AC3 (kW/A): 220V→ 5.5kW/7.5HP 380V→ 11kW/15HP 415V→ 11kW/15HP Overload Relay: TH series

It is a 3 pole AC contactor and it’s made in Taiwan. NHD is an ISO 9001:2015 certified company; all products are made in Taiwan, with good and steady quality. We are capable of according to customers' demand to manufacture products, also do OEM and ODM. Any requests welcome to discuss with us. The specification is as below: Contacts: 3NO, 2NO+2NC Rated insulation voltage, Ui: 1000V Thermal current Ith (AC1): 45A Rated Operational Current (AC3): 35A Mechanical Durability: 5 Mil. Cycles (1200 cycles/hr.) Electrical Durability: 0.5 Mil. Cycles (1200 cycles/hr.) Rated Capacity for 3Phase AC3 (kW/A): 220V→ 9kW/12.5HP 380V→ 15kW/20HP 415V→ 15kW/20HP Overload Relay: TH series

It is a 3 pole AC contactor and the maximum contactor of the S-C series. Also it’s the maximum one of NHD contactors. The specification is as below: Contacts: 3NO, 2NO+2NC Rated insulation voltage, Ui: 1000V Thermal current Ith (AC1): 250A Rated Operational Current (AC3): 220A Mechanical Durability: 5 Mil. Cycles (1200 cycles/hr.) Electrical Durability: 0.5 Mil. Cycles (1200 cycles/hr.) Rated Capacity for 3Phase AC3 (kW/A): 220V→ 65kW/85HP 380V→ 110kW/150HP 415V→ 110kW/150HP Overload Relay: TH series

It is certified by cULus, CE, CCC, suitable for AC1 using and designed for Refrigeration, Air-conditioning, Heating, and Lighting. Besides, this contactor’s heat dissipation is better. The volume and magnetic noise are smaller than normal contactors, therefore, it can save space and the magnetic noise is not obvious even in a quiet environment. It can reduce the worry of space consideration and the noise interference and unpleasant, so it is more appropriate for the use of air conditioning, heating, lighting, etc. We have another design, Din Rail Mounting. Please let us know if you need it. The specification is as below: Full Load Amps (AC1): 30A Coil Voltage: 380V AC, 50Hz Number of Pole: 2 Pole Mounting Method: Standard (Locked on the base plate.) Main Terminals: Screw with quick connect

It is certified by cULus, CE, CCC, suitable for AC1 using and designed for Refrigeration, Air-conditioning, Heating, and Lighting. Besides, the magnetic noise is smaller than normal contactors, therefore, it is not obvious even in a quiet environment. It can reduce its noise interference and unpleasant, so it is more appropriate for the use of air conditioning, heating, lighting, etc. This 3 pole contactor can equip with Auxiliary contact block, it can be 2a, 1a1b and, 2b, more diversified use. The specification is as below: Full Load Amps (AC1): 40A Coil Voltage: 240V AC, 50Hz Number of Pole: 3 Pole Mounting Method: Standard (Locked on the base plate.) Main Terminals: Box lug with quick connect Available to equip with Aux. contacts. 

It is certified by cULus, CE, CCC, suitable for AC1 using and designed for Refrigeration, Air-conditioning, Heating, and Lighting. Besides, this contactor’s heat dissipation is better. The volume and magnetic noise are smaller than normal contactors, therefore, it can save space and the magnetic noise is not obvious even in a quiet environment. It can reduce the worry of space consideration and the noise interference and unpleasant, so it is more appropriate for the use of air conditioning, heating, lighting, etc. Our products are made in Taiwan, so the voltage and frequency can be made as customers’ demand. Welcome to inquiry us. The specification is as below: Full Load Amps (AC1): 20A Coil Voltage: 120V AC, 60Hz Number of Pole: 1 Pole+1 Shunt Mounting Method: Din Rail Main Terminals: Screw

It is certified by cULus, CE, CCC, suitable for AC1 using and designed for Refrigeration, Air-conditioning, Heating, and Lighting. Besides, the magnetic noise is smaller than normal contactors, therefore, it is not obvious even in a quiet environment. It can reduce its noise interference and unpleasant, so it is more appropriate for the use of air conditioning, heating, lighting, etc. Its capacity is the maximum of this series and the volume is smaller than other brands, therefore, the application is more flexible. The specification is as below: Full Load Amps (AC1): 50A Coil Voltage: 24V AC, 60Hz Number of Pole: 4 Pole Mounting Method: Standard (Locked on the base plate.) Main Terminals: Box lug

This motor starter can equip with PG13.5 cable glands, and it’s IP65 rating. It’s very suitable for woodworking machines and dust collectors, etc. Also, it is very popular in the woodworking machinery of the US and Canada. Besides, there is another type which equipped with a remote control set, can control remotely. Please feel free to ask for more information. The specification is as below: Material: Plastic enclosure Includes: Start and Stop push buttons. (Momentary) Overload Relay, three elements with phase-failure protection. Operating Voltage: 220V AC, 50/60Hz The capacity of the overload relay: 2.9 to 4Amp Rated Capacity for 3Phase AC3: 200~220V→ 1HP 380~440V→ 2HP Equipped cable gland size: PG13.5

This motor starter can equip with PG16 &PG21 cable glands, and it’s IP65 rating. It’s very suitable for woodworking machines and dust collectors, etc. This is the maximum enclosure of MS series, whose size is 204*108*173mm (L*W*H). The height is not included the EM. Stop push button. The specification is as below: Material: Plastic enclosure Includes: Start (Momentary) and Emergency Stop Push Button (Pull To Release) Overload Relay, three elements with phase-failure protection. Operating Voltage: 380V AC, 50/60Hz The capacity of the overload relay: 30 to 38Amp Rated Capacity for 3Phase AC3: 380~440V→ 25HP 500~550V→ 30HP Equipped cable gland size: PG16 & PG21

This motor starter can equip with PG13.5 cable glands, and it’s IP65 rating. Because it can block the wood chips and dust, so it’s very suitable for woodworking machines and dust collectors, etc.  Therefore, the life of the contactor can be much longer relatively. Specification: Material: Plastic Enclosure Overload Relay, three elements with phase-failure protection. Operating Voltage: 230V AC, 50/60Hz The capacity of the overload relay: 14 to 17Amp Rated Capacity for 3Phase AC3: 200~220V→ 5HP 380~440V→ 10HP Equipped cable gland size: PG13.5

This motor starter is with metal enclosure, the protection degree is IP 40 rating and the size of the knockout hole is 22mm. Please inform us the needed voltage, horsepower, and frequency to confirm your demand. If there is any special requirement, please feel free to let us know. We will evaluate if it is available and discuss with you. Besides, because our products are all made by ourselves (Made in Taiwan), so we can manufacture the products depends on customer’s requirements, also capable to do OEM & ODM. Specifications: Includes momentary type push buttons with start and stop legends Enclosure size: 166*100*120mm (L*W*H)

The material of this enclosure is metal, whose protection degree is IP 40 rating and the size of the knockout hole is 55mm. This motor starter is made up of S-C150 contactor and TH-120 overload relay. It can reach 60HP at AC 220V, also it is the maximum capacity and enclosure of the MSN series. Specifications: Includes momentary type push buttons with start and stop legends Enclosure size: 350*230*177mm (L*W*H)

This motor starter is equipped with the minimum enclosure of the MSP series, whose ingress protection is IP42 rating. It is with an aerodynamic shape and can be opened by pressing the “PRESS” on the enclosure, very convenient for working. The specification is as below: Material: Plastic Enclosure Includes push button & emergency push button (Momentary) Three Phase, Three elements with phase-failure protection. Operating Voltage: 220V AC, 50/60Hz The capacity of the overload relay: 1.8 to 2.5Amp Rated Capacity for 3Phase AC3: 200~220V→ 0.5HP 380~440V→ 1HP Outlet Hole Size: M22

This motor starter is equipped with the maximum enclosure of the MSP series, whose ingress protection is IP42 rating. It is with an aerodynamic shape and can be opened by pressing the “PRESS” on the enclosure, very convenient for working. The specification is as below: Material: Plastic Enclosure Includes: Start and Stop push buttons (Momentary) Overload Relay, three elements with phase-failure protection. Operating Voltage: 415V AC, 50Hz The capacity of the overload relay: 26 to 32Amp Rated Capacity for 3Phase AC3: 200~220V→ 10HP 380~440V→ 20HP Outlet Hole Size: M3